Roach Model VBT3 3-Strand 90 Degree Transfer V-Belt Conveyor

3-Strand 90 Degree Transfer V-Belt Conveyor for Fragile Products and Clean Packaging
PDF CATALOG
INSTALLATION & MAINTENANCE

TYPE: Transfer and Merge Conveyors

Contact an Application Engineer
MODEL: Roach VBT3

The Roach Model VBT3 3-Strand 90 Degree Transfer V-Belt Conveyor is ideal for medium duty applications and is often used where product could be damaged by strands of chain on heavier duty chain transfers.    V-Belt conveyor lines contain unique, modular components that fulfill a host of system requirements.  The 3-Strand 90° Transfer V-Belt Conveyor is often used for fragile products and clean packaging.

Features

  • No chain lubrication is required
  • Easy belt replacement
  • Non-marring of conveyed products

Applications

  • Directional changes, merging, diverting, and product alignment
  • V-Belt transfer works well for offset connections. 
  • Fragile Products
  • Finished products that can not be marred
  • Finished packaging that must convey clean

Specifications

  • Transfer Arm: 10 ga. formed channel.
  • Transfer Belt: “B” section V-belt.
  • Standard Lengths: 3’, 4’, 5’, 6’, 7’ and 8’ unit lengths
  • V-Belt Centers: As required.
  • Center Drive: Allows reversible operation.
  • Strands: 2,3,4 or more.
  • Bearings: Heavy duty, lubricated, ball bearing unit with cast iron housings.
  • Belt Speed: As required.
  • Motor Drive: 1/2 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
  • Floor Supports: Integral part of unit, with adjustment of 18” to 20” top of V-belt (down position).
  • Lift: Positive type
  • Capacity: Unit load not to exceed 500 lbs.
  • Electrical Controls: Optional.
  • Air Control: 60-80 PSI required on air cylinders

For more information on the Roach Model VBT3 3-Strand 90° Transfer V-Belt Conveyor please contact a Thomas Conveyor & Equipment Automation Engineer at 844 220 0086 or click on the Contact Us button above.

QUESTIONS? CALL 844-220-0086