Heavy Duty Chain Driven Live Roller Curve Conveyor, Roach Model 251CDLRC

Features

• Chain driven live roller (CDLR) conveyors, or pallet conveyors, are typically used to transport heavier loads at controlled speeds. Chains drive the sprockets on the load rollers, which in turn drive the chain and the sprocket on the next roller
• CDLR conveyors transmit the same amount of power to each roller ensuring smooth, even transportation
• They are well suited for dirty or oily environments, where other types of live roller conveyors do not perform well
• Curved CDLR’s are used in warehouse operations that handle steel sheet products or structural shapes as well as pallets or skids
• Designed for torque not speed, these conveyor types transport loads at relatively slow speeds ranging between 35 and 60 feet per minute
• Model 251CDLRC is reversible. 

Applications

• Transport of heavy unit loads that do not require product orientation
• Heavy castings, drums, containers, tires, tote pans, & pallet loads may be effectively conveyed on this conveyor
• Well suited for dirty or oily environments, where other types of live roller conveyors do not perform well

Specifications

• Tread Rollers: 2-1/2” dia. x 11 ga. steel, model 251S with sprockets.
• Chain Drive: Roller to roller with No. 60 circular roller chain.
• End Drive: Reversible drive either side mounted or underside (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.
• Bearings: Precision ABEC bearings.
• Roller Centers: 6” RC measured at outside radius of curve.
• Motor Drive: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
• Speed: 35 FPM, constant.
• Bed: 6” x 1-1/2” x 7 ga. and 4” x 1-1/2” x 7 ga. formed steel channel frame.
• Chain Guard: The chain drive is enclosed, top and bottom, along the entire length of the conveyor.
• Drive Locations: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve).
• Electrical Controls: Optional.

Options

• Bed: Rollers on 4-1/2” centers on outside radius.
• Speed: Constant speed 1.5-60 FPM; DC variable speed; AC inverter variable speed. Other con-stant or variable speeds available. NOTE: Capacity changes with speed. 100 FPM Max. with roller to roller chain drive.
• Motors: Available through 3 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.
• Floor Supports: Supports, knee braces, casters, and polytier supports available. See Conveyor Accessories.

For more information on the Model 251CDLRC please contact a Thomas Conveyor & Equipment automation engineer at 844 220 0086 or click on the Contact Us button above.