Line Shaft Diverging Switch Module Conveyor, Roach Model 796LSDS

Features

• Line shaft Conveyors are an optimum solution for conveyance of light loads
• Speeds of 25-120 FPM
• Pivot section of rollers, pneumatically actuated, skews to divert packages onto spurs quickly and efficiently
• The diverter assembly is particularly adapted to divert objects at a right angle to a path of conveyance of the main conveyor; however, it may be adapted for other applications
• Designed for flat-bottomed, evenly distributed loads, such as those found in distribution, warehousing, food packaging and parcel handling.
• Clean, dry, oil free environments are ideal conditions to maximize line shaft roller performance.

Applications

• Sortation
• Product Routing and Diverting
• Zero Pressure Accumulation
• Minimum Pressure Accumulation

Specifications

• Tread Rollers: 1.9” dia. x 16 ga. steel, model 196S grooved.
• Drive Belt: 3/16” dia., polyurethane belts. Nominal 15 lbs. per roller drive.
• Drive Shaft: 1” dia. C1018 cold rolled steel shaft.
  NOTE: Spools in spur and spools in pivot roller section are keyed to provide positive drive (designed not to slip on drive shaft).
• Couplings: Couplings located both ends or one end only. Specify where couplings required. BED: 7” x 1-1/2” x 12 ga. formed steel channel frame. Short side of spur is always 12” overall length.
• Roller Chain: Spur driven via crossover with No. 40 chain
• Bearings: Precision, lubricated, ball bearing units with composite housings.
• Pneumatically Acutated: Diverging section of rollers is pneumatically actuated utilizing 60PSI maximum.
• Motor Drive: Unit is designed to be driven by 796LS.
• Direction of Flow: Specify right hand or left hand. To determine hand of spur, refer to pg. 136 in technical section.
• Minimum Package Size: Consult with your Thomas Conveyor Automation Engineer for minimum package size (minimum size may vary based on conveyor width).

Options

• Floor Supports: Supports, knee braces, casters, polytier supports & ceiling hangers available. See Conveyor Accessories.
• Guard Rails: 1-3/4” x 1” formed channel (model GC), adjusts horizontally to 8” wider than roller and vertically to 6” above roller; formed steel fixed (model FSG in 2”, 4” and 6” heights; fixed channel (model FC); 1-1/2” angle (model GA1-1/2). See Conveyor Accessories.

For more information on the Roach Model 796LSDS please contact a Thomas Conveyor & Equipment Automation Engineer at 844 220 0086 or click on the Contact Us button above.