Series 400, Transverse Roller Top Plastic Belt Conveyor, Roach Model 700TRT

Features

• Product turners or box turners are used to rotate objects to a specified degree necessary to meet requirements for the next part of a production line
• 90° turns are the most common, but nearly all variances in degrees are possible
• Products can be diverted from or merged onto conveyors with standard transverse-mounted rollers
• Rollers are situated in and extend across the belt
• Elimination of belt tracking problems
• Highly flexible for efficient conveyance
• Reduced sound operation
• Lightweight operation
• Easy to assemble and reconfigure
• Lower cost of maintenance
• Variety of working surfaces and incline levels

Applications

• Items requiring a 90° product transfer on or off
• Product Centering
• Carton Rotation

Specifications

• Belting: Series 400 transverse roller top gray polypropylene belt with acetal rollers & stainless steel roller axles, FDA approved belting.
• Drive Sprockets: 7.8” pitch dia. with 1.5” square bore. Available with Optional 10.1” pitch dia. sprockets with 1.5” or 2.5” square bore.
• Tail Sprockets: 7.8” pitch dia. with 1.5” square bore. Available with Optional 10.1” pitch dia. sprockets with 1.5” or 2.5” square bore.
• End Drive: Allows one-direction (unit) operation.
• Take Up: Catenary type located at discharge end.
• Return Rollers: 1.9” dia. x 16 ga. steel, model 196S, adjustable with rubber sleeves. BEARINGS: Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
• Belt Speed: 60 FPM, constant.
• Bed: 7” x 1-1/2” x 10 ga. channel frame with open style bed construction and UHMW wearstrips mounted to longitudinal channels.
• Motor Drive: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
• Roller Chain: Drive shaft is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
• Electrical controls: Optional.

For more information on the Roach Model 700TRT please contact a Thomas Conveyor & Equipment Automation Engineer at 844 220 0086 or click on the Contact Us button above.