28 Hillside Avenue • Hillside, IL 60162-0736

TOLL FREE (844) 220-0086

  • facebook
  • youtube
  • google plus
  • social_icon4

SLIDE KNIFE GATE LORENZ

Slide Gate Series E Lorenz Tube Pipe Stub connection;
PDF CATALOG
TYPE: Valves and Feeders
MODEL: SERIES E
MANUFACTURER: Lorenz

PRODUCTS HANDLED:
·         FLOUR, WHEAT, CORN
·         SUGAR
·         STARCH
·         MODIFIED FOOD STARCH
·         GLUTEN
·         SALT
·         SODIUM NITRATE
·         DEXTROSE
·         MEAL
·         TORTILLA
·         SEMOLINA
·         PLASTIC RESIN PELLET
·         LIME
·         LIMESTONE
·         CALCIUM CARBONATE, HYDRATED
·         SODA ASH
·         ACTIVATED CARBON  BLACK
·         PET-POLYETHYLENE
·         TEREPHTHALATE
·         HDPE; HIGH DENSITY POLYETHYLENE
·         PVC-POLYVINYL CHLORIDE
·         LDPE-LOW DENSITY POLYETHYLENE
·         PP- POLYPROPYLENE
·         PS-POLYSTYRENE
·         POLYCARBONATE
·         ACRYLICS
·         ACRYLONITRILE-BUTADIENE-STYRENE-ABS
·         NYLON
·         PHENOLIC
·         STYRENE


ALL E SERIES VALVES HAVE THE SAME STANDARD FEATURES AND OPTIONS:

STANDARD FEATURES
·         POSITIVE BLADE LOCK (PBL) BETWEEN BLADE & CYLINDER ROD
·         INTERNAL MAGNETIC PISTON, CUSHIONED AIR CYLINDER
·         POLISHED STEEL BLADE
·         ACTIVE COMPRESSION SEALS (ACS)
·         LIGHT WEIGHT ALUMINUM BODY CONSTRUCTION
·         TEMPERATURE RATED FOR UP TO 82° C (180° F)
·         WALL THICKNESS OF 16, 14 & 11 GAUGE, SCHEDULE 10, 40 & 80
·         FULLY TESTED PRIOR TO SHIPPING


OPTIONS
·         POSITION SWITCHES 5 VOLT TO 240 VOLT AC/DC
·         PROXIMITY SWITCHES
·         OVERSIZED CYLINDERS
·         VALVE BODY SEALED FOR AIR PURGING
·         HIGH TEMPERATURE MODIFICATIONS
·         MANUAL HAND CRANK OPERATION
·         PREWIRED TERMINAL BOXES
·         SPECIAL SEAL CONFIGURATIONS
·         SOLENOIDS 110 VOLT AC OR 24 VOLT DC
·         DOUBLE ACTING OR SINGLE ACTING SPRING RETURN SOLENOID OR
·         MANUAL LEVER VALVE
·         NEMA 7-9 HAZARDOUS LOCATIONS
·         CLASS I, GROUPS B, C & D, CLASS II, GROUPS E, F & G
·         ELECTRIC ACTUATION
·         SPECIAL SERVICE INLET
 
SLIDE KNIFE GATE LORENZ SERIES E- MODEL TPS- TUBE AND PIPE STUBS
 
THE MODEL “TPS” SLIDE KNIFE GATE LORENZ SERIES E- TUBE AND PIPE STUBS IS DESIGNED FOR MORRIS TYPE COMPRESSION COUPLINGS AND WILL SERVICE 15 PSI MAX PRESSURE AND 15” HG MAX VACUUM.
DIVERTER TUBE - WALL THICKNESS OF 16, 14 & 11 GAUGE
DIVERTER PIPE - WALL THICKNESS OF SCH 10, 40 & 80
 
SLIDE KNIFE GATE SERIES E LORENZ LIGHTWEIGHT STUD PATTERN
 
THE MODEL “LSP” SLIDE KNIFE GATE SERIES E LORENZ LIGHTWEIGHT STUD PATTERN IS PROVIDED WITH ITS OWN LIGHTWEIGHT SCREW STUDS FOR SUPPORTING IN LIGHT DUTY APPLICATIONS.
 
SLIDE KNIFE GATE SERIES E LORENZ 150 LBS PIPE FLANGE STUDS
 
THE MODEL “SB” SLIDE KNIFE GATE SERIES E LORENZ 150 LBS PIPE FLANGE STUDS HAS ITS OWN BUILT IN BOLTS FOR BOLTING TO 150 LBS FLANGES BOTH ON TOP AND BOTTOM. THIS VALVE SHOULD NOT BE USED IF “ANY” WEIGHT OF THE BELOW EQUIPMENT WILL BE SUSPENDED / SUPPORTED BY THIS GATE.
 
SLIDE KNIFE GATE SERIES E LORENZ  150 LBS PIPE FLANGE TAPPED HOLES
 
THE MODEL “BBH” SLIDE KNIFE GATE SERIES E LORENZ  150 LBS PIPE FLANGE BLIND BOLT HOLE WITH TAPPED HOLES FOR BOLTING TO 150 LBS FLANGES BOTH ON TOP AND BOTTOM. THIS VALVE SHOULD NOT BE USED IF “ANY” WEIGHT OF THE BELOW EQUIPMENT WILL BE SUSPENDED / SUPPORTED BY THIS GATE.
 
SLIDE KNIFE GATE SERIES E LORENZ 150 LBS FLANGE BOLT THRU
 
THE MODEL “BTV” SLIDE KNIFE GATE SERIES E LORENZ 150 LBS FLANGE BOLT THRU PIPE FLANGE THRU HOLES ON THE OUTER EDGE OF THE VALVE WHERE THESE THRU BOLTS WILL NOT IMPEDE THE SLIDE GATE. FOR BOLTING TO 150 LBS FLANGES BOTH ON TOP AND BOTTOM. THIS VALVE IS NOT DESIGNED TO SUPPORT THE WEIGHT OF THE BELOW EQUIPMENT BELOW. THE THRU HOLES ARE DESIGNED TO ALLOW THREADED ROD TO SUPPORT LIMIT WEIGHT OF BELOW PROCESS EQUIPMENT FROM THE TOP FLANGE THAT THE TOP OF THE GATE IS BEING SUPPORTED BY.
 
SLIDE KNIFE GATE SERIES E LORENZ PULL PUSH IN OUT HAND
 
THE MODEL SLIDE GATE SERIES E LORENZ PULL PUSH IN OUT HAND IS DESIGNED FOR GRAVITY OPERATIONS OPEN/CLOSED/INTERMEDIATE POSITION TO METER FLOW OR TO MANUALLY EMPTY A HOPPER.  THIS VALVE SHOULD NOT BE USED IF “ANY” WEIGHT OF THE BELOW EQUIPMENT WILL BE SUSPENDED / SUPPORTED BY THIS GATE.
 

QUESTIONS? CALL (844)220-0086