1.9” DIA. X 16 GA. Steel Gravity Roller Conveyor (Roach Model 196S)

Features Non-powered roller conveyors or gravity conveyors are the most economical and common method of conveying unit loads Typically mounted on a slight decline angle, therefore using gravity to assist product movement, especially for long distances or can be moved by a person pushing the load along the conveyor rollers

• Can provide no-contact accumulation of product
• Cost effective
• 1300 lbs. Maximum distributed live load per 10’ section with supports at 10’ centers; 3200 lbs. at 5' centers
• Roller Capacity: 250 lbs per roller

Applications

• Essential for packaging facilities, manufacturing plants, and distribution facilities, gravity roller conveyors allow quick transportation of bulk materials
• Convey loads of wire bins, canisters, barrels, wooden boxes, drums, lumber, cartons, totes, & cardboard boxes
• Use in applications where the conveyor is level and operators can push the product along to its final destination, allowing for multiple workstations, as necessary
• Used on conveyor lines in warehouses, shipping areas, assembly areas and more

Specifications

• Rollers: 1.9” x 16 ga. steel tubing, Model 196S, with smooth swaged ends.
• Frames: Formed steel painted channel 3- 1/2” x 1-1/2” x 10 ga. set high; 4- 1/2” x 1-1/2” x 10 ga. set low.
• Bearings: Integral plain ball bearings, zinc plated, grease packed.
• Frame Capacity: 250 lbs. per roller, or 1300 lbs. maximum distributed live load per 10’ section with supports at 10’ centers; 3200 lbs. at 5’ centers.
• Couplings: Butt type.
• Axles: 7/16” hex shaft, spring loaded.
• Optional Frame: 4” @ 5.4 lbs. struc. steel channel frame, rollers 3/16” high, may vary due to structural tolerances.

For more information on the Model 196S/196SC please contact a Thomas Conveyor & Equipment Automation Engineer at 844 220 0086 or click on the Contact Us button above.