1.9” DIA. X 9 GA. Gravity Roller Conveyor (Roach Model 199S)

Roach Model 199S .9” Dia. X 9 GA. Gravity Roller Conveyor conveys product efficiently and economically.
PDF CATALOG

TYPE: Gravity Roller Conveyors - 24 Hour Ship

MODEL: RCH 199S

1.9" diameter x 9 gauge steel straight or curved gravity roller conveyor Roach Model 199S

Features

  • Non-powered roller conveyors or gravity conveyors are the most economical and common method of conveying unit loads
  • Typically mounted on a slight decline angle, therefore using gravity to assist product movement, especially for long distances or can be moved by a person pushing the load along the conveyor rollers

          

24 Hour Shipping Available

  • Can provide no-contact accumulation of product
  • Cost effective
  • 1300 lbs. Maximum distributed live load per 10’ section with supports at 10’ centers; 3200 lbs. at 5' centers
  • Roller Capacity: 260 lbs per roller

Applications

  • Essential for packaging facilities, manufacturing plants, and distribution facilities, gravity roller conveyors allow quick transportation of bulk materials
  • Convey loads of wire bins, canisters, barrels, wooden boxes, drums, lumber, cartons, totes, & cardboard boxes
  • Use in applications where the conveyor is level and operators can push the product along to its final destination, allowing for multiple workstations, as necessary
  • Used on conveyor lines in warehouses, shipping areas, assembly areas and more

Specifications

  • Rollers: 1.9” x 9 ga. steel tubing, model 199S, with straight ends reamed to provide smooth bearing seats.
  • Frames: Formed steel painted channel 3- 1/2” x 1-1/2” x 10 ga. set high;
    4- 1/2” x 1-1/2” x 10 ga. set low.
  • Roller Capacity: 260 lbs. per roller.
  • Bearings: Integral plain ball bearings, zinc plated, grease packed.
  • Frame Capacity: 1300 lbs. max. dis-tributed live load per 10’ section with supports at 10’ centers; 3200 lbs. at 5’ ctrs.
  • Couplings: Butt type.
  • Axles: 7/16” hex shaft, spring loaded.
  • Optional Frame: 4” @ 5.4 lbs. struc. steel channel frame, rollers 3/16” high, may vary due to structural tolerances.

For more information on the Model 199S please contact a Thomas Conveyor & Equipment Automation Engineer at 844 220 0086 or click on the Contact Us button above.

QUESTIONS? CALL 844-220-0086