2.5” Dia. X 14 GA. Tapered Roller Curve, Roach Model 254TC

Features Non-powered roller conveyors or gravity conveyors are the most economical and common method of conveying unit loads Typically mounted on a slight decline angle, therefore using gravity to assist product movement, especially for long distances or can be moved by a person pushing the load along the conveyor rollers

• Tapered roller curve conveyor can add to the versatility of straight conveyors.  Conveyor curves provide smooth product flow with a minimum amount of pitch based on the weight and size of the product being conveyed
• Can provide no-contact accumulation of product
• Cost effective
• Frame capacity is 650 lbs maximum distributed live load with supports at each end of curve section and at the outside of a 90 degree curve section
• Roller Capacity: 250 lbs per roller

Applications

• Gravity tapered roller curves are compatible with straight section conveyors providing flexibility to your conveyor line and aid in the alignment of packages
• Essential for packaging facilities, manufacturing plants, and distribution facilities, gravity roller conveyors allow quick transportation of bulk materials
• Convey loads of wire bins, canisters, barrels, wooden boxes, drums, lumber, cartons, totes, & strapped items
• Use in applications where the conveyor is level and operators can push the product along to its final destination, allowing for multiple workstations, as necessary
• Used on conveyor lines in warehouses, shipping areas, assembly areas and more

Specifications

• Tapered Rollers: 2-1/2” dia. to 1-11/16” dia. x 14 ga. steel tubing, model 254T, with smooth swaged ends.
• Frames: Formed steel painted channel 3- 1/2” x 1-1/2” x 10 ga. set high; 4- 1/2” x 1-1/2” x 10 ga. set low.
• Roller Capacity: 250 lbs. per roller.
• Axles: 7/16” hex shaft, spring loaded.
• Bearings: Integral plain ball bearings, zinc plated, grease packed, removable type bearings.
• Frame Capacity: 650 lbs. maximum distributed live load with supports at each end of curve section and at the outside of a 90° curve section.
• Couplings: Butt type.

For more information on the Model 254TC please contact a Thomas Conveyor & Equipment Automation Engineer at 844 220 0086 or click on the Contact Us button above.