Call 844-220-0086
Drive In Storage Rack System for LIFO Pallet Storage
Drive-In storage systems are free-standing, self-supporting racks that allow a vehicle drive-in access to products being stored.
Rub Rail: Heavy horizontal impact channel used at floor level to protect upright or frame from vehicle or pallet damage. Post Protectors: Heavy structural steel protectors affords added security against abuse from handling equipment.Space Saver Arm: When vertical space is an important consideration, rails can be mounted at the same height as support arms. This saves 3” of height for each rail.Mitered Entry: Sharp corners on support rails can be mitered off for increased safety. This may be used at lower levels where hand picking is done.Reel Support Bracket: Easily converts standard rack to reel-on coil storage. (Sold in pairs only. Axles not included.)Row End Protectors: Structural steel channels used at the end of each aisle serve as a guard preventing frame damage.Slant-Back Frame: For areas where space restrictions may create a hazard for trucks, a slant-back frame can provide a necessary margin for safety.Flared Entries: Rails can be flared out at the entry point for easier, faster pallet positioning, safer handling and less damage.
For more information on Drive In Pallet Racking or for a pallet flow racking consultation, please contact a Thomas Conveyor & Equipment Automation Engineer at 844 220 0086 or click on the Contact Us button above.