The PalletPal Automatic Turntable can be installed into a lift table product rotation and pallet wrapping
The PalletPal Automatic built-in turntable is essentially flush to the table platform in a clean, uncluttered design. They feature an integrated turntable platform that allows workers to rotate loads for access to all sides without walking around the lift. This is especially helpful in manufacturing and assembly when tools are only available on one side of the lift table. In palletizing applications, it eliminates the need to stretch for boxes on the far side or walking around the load. The turntable bearings and support are under the platform and do not substantially increase the lowered height over that of comparable lifts without turntables. The turntable sits only 3/16" higher than the surrounding platform and is rotationally locked when the lift is in the full down position.
Flush mount turntable lifts are available in standard Southworth Backsaver Lift with capacities to 4000lbs. These turntables are available in 2 sizes; 20" and 43" diameter and are fitted into a limited number of platform sizes. The 43" diameter model can even be pit mounted.
Contact the experts at Thomas Conveyor to discuss if a PalletPal Automatic Turntable is the correct turntable for your manufacturing or distribution facility.