Call 844-220-0086
The LIFT-O-FLEX Core Probe is used to handle rolls from horizontal pickup to horizontal drop off.
The fixed core probe can handle rolls weighing up to approximately 200 lbs. with the LIFT-O-FLEX™ 20000 series.
The wheeled core probe is used for heavy duty roll handling. Skate wheels are mounted to the top of the probe, and a latch pin is used to hold the roll into position after loading. The skate wheels assist the operator in unloading or loading onto the unit.
The principle operation remains the same as the fixed core probe, except the skate wheels assist the operator in unloading and loading the core probe. The wheeled core probe can handle rolls weighing up to 200 lbs. with the LIFT-O-FLEX® 20000 series and up to 300 lbs. with the LIFT-O-FLEX® 19000 series (higher load capacities are available).
For more information on the RonI LIFT-O-FLEX™ Core Probe extension for LIFT-O-FLEX Ergonomic Lifters, please contact a Thomas Conveyor & Equipment automation engineer at 800 220 0086 or click on the Contact Us button above.