NLE Model 750/751 SteelTrak™ Hinged Steel Belt Conveyor

TYPE: Hinge Metal Belt Conveyor


When medium and heavy-duty industrial metals call for a heavy-weight contender, the 750/751 offers a larger drive shaft and higher horsepower to plow through your workloads. The Model 750 is the heavier version of the Model 751, with larger drive shafts and higher horsepower motor.


  • More robust than belt conveyors, they handle medium to heavy duty industrial applications
  • The Model 750 is the heavier version of the Model 751, with larger drive shafts and higher horsepower motor
  • Convey nearly any type of metal scrap
  • Offer a long-term, low-maintenance solution for industrial, scrap, steel chip, and fastener applications
  • Conveys hot oily parts from punch presses, forging machines, etc. to drums or hoppers
  • Their various apron, sidewing, siderail, and frame designs will make your waste removal easy and efficient
  • The TruTrak™ flanged rollers remove the side-to-side movement of the belt within the belt track. Eliminating belt sway on the track also erases rub against the frame, as well as wear and tear to the conveyor frame, belt axles, sidewings, and cotter pins
  • TruTrak’s™ features also are the perfect choice in applications where prevention of downtime is a priority


  • Can be used to carry oily, hot or sharp edged parts
  • This hinged slat conveyor is for heavy duty applications and can be used in the forging and foundry industries or with any conveyor carrying a heavy load
  • Often used in production environments where oil or metal chips can soil the conveyor
  • Most applications involve handling metal, with the material often dropping with an impact that other conveyors could not handle


  • Widths: 12", 18", 24", 30", 36", 48", and 60" (Custom Widths Available)
  • Lengths: Depends on Application
  • Standard Speed: 30 FPM
  • Standard Motor: 1/2 HP 230/460/3/60 TEFC
  • Standard Drive: Top Mount, Right Side
  • Frame: 15-1/4" Deep x Formed 10 Gauge
  • Drive Shaft Dia.: (M751 = 1-15/16") (M750 = 2-15/16")
  • Infeed Shaft Dia.: (M751 = 1-11/16") (M750 = 1-15/16")
  • Bearings: Grease Sealed
  • Sprockets: 6 Tooth x 8" Pitch Diameter
  • Belt: 4" pitch hinged steel belt, one piece apron, with 2-3/8" high cleats on 24" centers, 3" high side wings, 1-3/4" diameter hardened flanged rollers, outside sidebars, 1/2" diameter axle with impact tube.

For more information on the Model 750/751SteelTrak™ Hinged Steel Belt Conveyor please contact a Thomas Conveyor & Equipment automation engineer at 844 220 0086 or click on the Contact Us button above.

QUESTIONS? CALL 844-220-0086