NLE Model 715 SteelTrak™ Hinged Steel Belt Conveyor

Features

• Low profile design is ideal for applications needing a narrow conveyor base
• Designed for applications with very fine chips and turnings
• Available as a flat horizontal conveyor or can be configured into three different incline positions
• Allows for continuous operation, whether on an incline, decline or level surface
• Conveys nearly any type of metal scrap
• Various apron, sidewing, siderail, and frame designs make waste removal easy and efficient
• TruTrak™ flanged rollers remove the side-to-side movement of the belt within the belt track. Eliminating belt sway erases rub against the frame, as well as wear and tear to the conveyor frame, belt axles, sidewings, and cotter pins
• TruTrak’s™ features also are the perfect choice in applications where prevention of downtime is a priority

Applications

• Applications with very fine chips and turnings
• Long-term, low-maintenance operations in industrial, scrap, steel chip, and fastener applications
• Conveys hot oily parts from punch presses, forging machines, etc. to drums or hoppers

Specifications

• Widths: 4" – 24" (Custom Widths Available)
• Lengths: 3' – 20' (Infeed = 12" /Discharge = 18")
• Curves: 30°, 45° and 60°
• Standard Speed: 30 FPM
• Standard Motor: 1/2 HP 230/460/3/60 TEFC
• Standard Drive: Top Mount, Right Side
• Frame: 4-1/8" Deep at Infeed; 6-5/8" Deep, Lower Curve thru Discharge x 14 Gauge
• Bearings: Grease Sealed at Discharge; Press in Bronze Bushings at Infeed
• Sprockets: 10 Tooth x 4.854" Pitch Diameter
• Belt: 1-1/2" Pitch Hinged Steel Belt, One Piece Conventional 14 Gauge Apron, with 5/8" high cleats on 12" Centers, 12 Gauge x 3/4" high radial side wings, 7/8" x 1/2" wide Flat Face Rollers, 12 Gauge Outside Sidebars
• NOTE: Conventional Belt Only

For more information on the Model 715 SteelTrak™ Hinged Steel Belt Conveyor please contact a Thomas Conveyor & Equipment Automation Engineer at 844 220 0086 or click on the Contact Us button above.