2-Strand Chain Drag Conveyor, Roach Model CD280

Features

• Able to convey heavy duty, oversized items such as pallets, skids or other large unit loads
• Suited for products with unusual characteristics such as pallets or specialty tote pans
• Used to convey pallets with the runners going the wrong way. (The runners run perpendicular to the chain direction.)
• Available as a standalone component or can easily be integrated into your existing system

Applications

• Pallets
• Specialty Tote Pans

Specifications

• Frame: 7 ga. formed boxed channel
• Carrier Chain: No. 80 (model CD280) or no. 60 (model CD260) riveted roller chain
• Wear Strip: UHMW long lasting wear strip, upper and lower.
• Chain Centers: 18” CHAIN TAKE-UP: Screw type located at tail end
• End Drive: Allows one-direction (unit) operation; add optional center drive for reversible application.
• Chain Speed: 35 FPM constant.
• Bearings: Heavy duty, lubricated, ball bearing unit with cast iron housings.
• Capacity: Unit load not to exceed 3000 lbs.
• Motor Drive: 1/2 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
• Electrical Controls: Optional

Options

• Strands: 3, 4 or more
• Construction: Durable structural frame.
• Chain Centers: 12”, 24” or as required by application
• Floor Supports: Supports available. See Conveyor Accessories.
• Chain Speed: 35-120 FPM, constant speed (specify). Other constant or variable speed available. NOTE: Capacity changes with speed.
• Motors: Available through 3 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.
• Electrical Controls: Manual start/stop push button switch; magnetic starter; photo eye; limit switch; photo relay; others available.

For more information on the Model CD280 please contact a Thomas Conveyor & Equipment Automation Engineer at 844 220 0086 or click on the Contact Us button above.