3-Strand 90° Round Belt Transfer Conveyor, Roach Model RBT3

Roach Model RBT3, 3-Strand 90° Round Belt Transfer conveyor is perfect for moving products from one location to another in a straight line either horizontally or at an incline

TYPE: Line Shaft Conveyors


The Model RBT3 can transfer up to 100 lbs of product at 90° intervals. No drive is necessary when it is mounted into a line shaft driven conveyor.


  • Perfect for moving products from one location to another in a straight line either horizontally or at an incline.
  • A Model RBT3 is an economic solution for processing and packaging operations often require conveyors to elevate, decline, or transport product
  • Transfers up to 100lbs of product at 90° intervals
  • No drive is necessary when mounted onto a line shaft driven conveyor.
  • Line shaft conveyors are generally used to convey light products such as cartons, totes, or parcel packages up to 100 pounds 


  • Warehousing & Distribution
  • Manufacturing
  • Order Fulfillment
  • Aerospace
  • Government
  • Military &  Agency
  • Automotive
  • Parcel Handling


  • Transfer Arm: 10 ga. formed channel
  • Transfer Belt: 3/8” dia. round polyurethane belt.
  • Lengths: Transfer designed to mount in 796LS line shaft conveyors 15”-39” BF.
  • Belt Centers: 12”
  • One Direction Flow: Transfers product in one direction.
  • Take-Up: Adjustable sheaves provides take-up of transfer belt.
  • Bearings: Heavy duty, lubricated, ball bearing units with cast iron housings.
  • Belt Speed: Driven at 150% of speed as powered section transfer is mounted in
  • Lift: 3/4” positive lift.
  • Motor Drive: Optional.
  • Capacity: 100 lbs.
  • Air Controls: Air cylinder with single solenoid valve. (60-80 PSI required)
  • Floor Supports: Transfer is designed to attach to 796LS/738LS conveyors w/ mounting hardware integral feature of transfer.
    NOTE: Specify twist (clockwise or counter clockwise) for drive bands on line shaft conveyor (model LS or LSA) that transfer mounts in. Consult factory.


  • Strands: 2 and 4
  • Belt Center: 18” and 24” with 4” centerline minimum.
  • Motor Drive: 1/2 HP, 230/460/3, 60 cycle, ODP right angle gear motor. Other HP and characteristics available such as TEFC, explosion proof, dirty duty, brake motor, 115/230/1, 575/3.
  • Direction of Flow: Reversible.
  • Belt Speed: For some speed changes an optional drive may be required. Consult with your Thomas Conveyor Automation Engineer.

For more information on the Roach Model RBT3 please contact a Thomas Conveyor & Equipment Automation Engineer at 844 220 0086 or click on the Contact Us button above.

QUESTIONS? CALL 844-220-0086