Heavy Duty Chain Driven Live Roller Conveyor, Roach Model 3530CDLR

Roach Model 3530CDLR is a heavy duty conveyor used for extremely heavy unit loads and tough working environments, such as extraordinarily large load sizes, concentrated loads, and impact loading.  

Features

• Heavy .300 wall steel rollers
• Larger size roller chain
• Heavy duty structural frame for applications demanding ultra-durable construction and durability

Applications

Designed to meet all of your unique heavy duty conveyor application challenges including:

• Abrasive airborne dust in environments such as foundries where conditions necessitate special seals and enhanced design safety factors.
• Extremely wide loads requiring special rollers for extra wide conveying applications. Shaft deflection can cause bearings to fail prematurely if the roller is not designed properly.
• Super heavy loads that require live shaft rollers. Pillow block or flange mounted bearings may be needed instead of the standard pressed in bearing and fixed axle rollers typically used.

Specifications

• Tread Rollers: 3-1/2” dia. x .300 wall steel, model 3530S with sprockets.
• Chain Guard: The chain drive is completely enclosed along the entire length of the conveyor.
• Center Drive: Reversible drive either side mounted or underneath mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.
• Bearings: Precision ABEC bearings.
• Bed Lengths
  • (6” RC, #60 CHAIN AND 12” RC, #80 CHAIN): Intermediate bed section lengths 3’-0”, 4’-0”, 5’-0”, 6’-0”, 7’-0”, 8’-0”, 9’-0” and 10’-0” increments. Minimum overall conveyor length with drive 5’-0”. Maximum overall conveyor length 80’-0”.
  • (7-1/2” RC, #80 CHAIN): Intermediate bed section lengths 3’-1-1/2”, 3’-9”, 4’-4-1/2”, 5’-0”, 5’-7-1/2”, 6’-3”, 6’-10-1/2”, 7’-6”, 8’-1-1/2”, 8’-9”, 9’-4-1/2” and 10’-0”. Minimum overall conveyor length with drive 5’-0”. Maximum overall conveyor length 80’-0”.
• Roller Centers: 6” with No. 60 chain; 7-1/2” and 12” with No. 80 chain.
• Chain Drive: Roller to roller with No. 60 or No. 80 roller chain.
• Speed: 35 FPM constant.
• Bed: 6” at 8.2 lbs. and 8” at 11.5 lbs. structural steel frame. Bed sections attached with couplings and floor supports.
• Motor Drive: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
• Roller Capacity: 2500 lbs. per roller.
• Electrical Controls: Optional.

Options

• Speed: Constant speed 1.5-100 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available. NOTE: Capacity changes with speed.  100 FPM Max. with roll to roll chain drive
• Floor Supports: Supports and knee braces available. See Conveyor Accessories.
• Electrical Controls: Magnetic starter (one direction or reversible); one direc-tion manual starter; momentary start/stop push button station; forward/reversing/stop push button
  station; mounting and pre-wiring for units 12’-0” long and under; limit switch, photo relay; others available.
• Motors:  Available through 5 HP in TEFC, explosion proof, dirty duty, brake motor, 115/230/1, 575/3, etc.

For more information on the Model 3530CDLR please contact a Thomas Conveyor & Equipment automation engineer at 844 220 0086 or click on the Contact Us button above.