Heavy Duty Tapered Roller Chain Driven Live Roller Curve Conveyor, Roach Model 351TCDLRC

Features

• Designed to transport heavy duty loads such as castings, containers, drums or pallets
• "True Taper" helps to maintain product orientation throughout the curve
• Chain driven live roller conveyors (CDLRs), or pallet conveyors, are typically used to transport heavier loads at controlled speeds. Chains drive the sprockets on the load rollers, which in turn drive the chain and the sprocket on the next roller.
• CDLR systems transmit the same amount of power to each roller thus ensuring smooth, even transportation.
• Reversible
• Achieves true zero pressure accumulation
• Quiet operation
• Handles dense accumulation
• Handles light to extra heavy duty materials
• Versatile design and configurations
• Easy installation and maintenance 

Applications

• Transports pallets, castings, drums, containers, etc.
• Heavy Unit Loads
• Suited for dirty or oily environments, where other types of live roller conveyors will not perform well

Specifications

• Tread Rollers: Heavy duty 11 ga. tapered rollers, model 351T with sprockets, for true taper effect. See chart, upper right corner for roller dia.
• Chain Drive: Roller to roller with No. 60 circular roller chain
• End Drive: Reversible drive either side mounted or underside (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.
• Roller Centers: 6” RC measured at outside radius of curve.
• Speed: 35 FPM, constant
• Bed: 5” at 6.7 lbs. and 7” at 9.8 lbs. structural steel channel frame.
• Bearings: Precision ABEC bearings
• Chain Guard: The chain drive is enclosed, top and bottom, along the entire length of the conveyor.
• Motor Drive: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
• Drive Location: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve).
• Electrical Controls Optional.

Options

• Bed: Rollers on 4-1/2” centers on outside radius for 21”-39” BF.
• Floor Supports: Supports avail-able. See Conveyor Accessories.
• Speed:Constant speed 1.5-60 FPM; DC variable speed; AC inverter variable speed. Other con-stant or variable speeds available. NOTE: Capacity changes with speed. 100 FPM Max. with roller to roller chain drive.
• Motors: Available through 3 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.

For more information on the Model 351TCDLRC please contact a Thomas Conveyor & Equipment Automation Engineer at 844 220 0086 or click on the Contact Us button above.