LIFT-O-FLEX® Heavy Duty Ergonomic Lifter, Series 19000/19500

The LIFT-O-FLEX™ 19000/19500 Series Ergonomic Lifter offers dynamic load handling characteristics for heavy load capacities.

LIFT-O-FLEX

• The LIFT-O-FLEX™ is an ergonomic material handling solution that is designed to lift, move, invert and rotate rolls, spools, reels, as well as other products of similar size and shape.    
• The LIFT-O-FLEX™ has a wide variety of standard end effectors, attachments, tooling and manipulators available.  The end effectors, or attachments, are completely interchangeable. This allows for interchangeability between lifters, allowing the user to meet their ergonomic lifting needs while providing flexibility with interchangeable tooling without incurring the cost of a complete replacement.
• LIFT-O-FLEX™ and its tooling attachments are available in a powder coated finish, anodized aluminum or stainless steel construction. Wash down versions are available. 
• Custom options are always welcome, and we will happily work with you to determine a customized LIFT-O-FLEX™ configuration that will provide the best solution for your operation. 

1900/19500 Features

• The RonI LIFT-O-FLEX™ is intended to assist you with lifting loads where a forklift would be considered too heavy and cumbersome.
• The 19000 series has a lift capacity of 350 lbs.
• The 19500 series has a lift capacity of 500 lbs.  
• Anodized Aluminum Profiles
  Intermediate Sections-Standard and Custom lengths
  Lift Masts
• Steel (Powder Coated Paint-Optional SS)
  Legs-Bolted to Intermediate
  Adjustable Handlebar Height
  Power Pack Cover
• Standard and custom leg configurations and heights
  Swivel and fixed casters
• Standard and custom length lift masts
• Foot operated 3 position central brake system on rear casters
  Brake, free wheeling and center lock (trailing)
• Lift mast slip clutch on the down movement provides for safe load handling
• Current limiting (no limit switches) provide for load limiting and stops
• Totally enclosed lift mast w/ball screw for smooth up and down DC powered movement
• Electronic power pack can be provided with either standard or heavy-duty batteries
  Power packs are also exchangeable allowing for multi-shift operation
• Detachable remote controller
  Provides the operator with control over load handling functions.
• Handlebar is operator adjusted to achieve ergonomic operation

Specifications

• Minimum Lift Height: 56mm (~2.2”)
• Lift-Speed 19000 Series:100mm/sec (4”/sec)
• Lift-Speed 19500 Series: 50mm/sec (2”/sec)
• Legs-Standard (Overall Length): Std Length 984mm (38.75”)
  Long 1184mm (46.62”)
  X-Long 1384mm (54.5”)
• Legs:Low Profile (Overall Length) Std Length 961mm (37.84”)
  Long 1161mm (45.72”)-X-Long 1361mm (53.6”) Legs
  X-Low Profile (Overall Length) Std Length 900mm (35.4”)-Long 1110mm (39.7”)
• Wheel Material: Polyurethane/Rubber
• Wheel Diameter (Front/Back): Standard 100mm (3.9”)/150mm (5.9”)-Front Single Swivel
• Wheel Diameter (Front/Back): Low built 62mm (2.44”)/100mm (3.9”)-Front Dual Swivel
• Wheel Diameter (Front/Back): X-Low built 76mm (2.9”)/150mm (5.9”)-Front Fixed Castor
• Width: Outside Std-556mm (21.8”)
  Wide 680mm (26.7”)
  X-Wide 858mm (33.4”)
• Noise level: >70dB(A)
• Maximum Load 19000 Series: 160Kg (350-lbs)
• Maximum Load 19500 Series: 225Kg (500-lbs)
• Lifter Weight w/o End-Effector: 90Kg (198-lbs)
• Battery Type: Lead Gel Cell
• Battery Voltage: 24V, 2 Amp
• Battery Capacity:  7.2 AHr
• Recharge Time: 6-8 Hours
• Finish: Powder Coated Paint/Anodized or Stainless Steel/Anodized

Please click HERE to see the available LIFT-O-FLEX™ end effector/tooling options. 

For more information on the LIFT-O-FLEX™ Series 19000/19500 Heavy Duty Ergonomic Lifters please contact a Thomas Conveyor & Equipment Ergonomic Automation Engineer at 844 220 0086 or click on the Contact Us button above.