Medium Duty Manual Roller and Blade Stops (for Gravity Conveyors)

With Roach Medium Duty Manual Roller and Blade Stops, you can stop and start product traffic without stopping and starting conveyor motors.  They are hand operated and used where line control is required such as slug accumulation, indexing, workstations, etc.

Features

• The stops are hand-operated and mounted beneath the conveyor surface with a stainless steel blade or a set of pins which extends above and retracts below the roller surface between roller shafts on command
• Customized product stops can also be mounted above the conveyor surface
• Product stops can be relocated and/or added as product handling needs change
• Units can be modified by the engineering department for custom needs, or purchased standard for most applications.
• Designed for 3 1/2" and 4" frame depths

Applications

• Used when line control is needed such as slug accumulation, indexing, workstations, etc.
• Used on conveyor lines in packaging, manufacturing, distribution, warehouses, shipping areas, assembly areas, order fulfillment, automotive, food and beverage industries and more 

Specifications

• Roller Stop: 1.9” dia. x 16 ga. steel 196S roller for medium duty; 2.5” dia. x 11 ga. steel 251S roller for heavy duty.
• Bearings: Removable type, heavy duty ball bearing, with cast iron housings.
• Lock: Positive over center locking device to hold position.
• Blade Stop: 7 ga. formed angle.
• Widths: 24 hour shipments include 13”, 15”, 17”, 19”, 21”, 23”, 25”, 27”, 31”, 33”, 37”, 39”, 43”, 45”, 47” and 51” BF.

For more information on Roach Medium Duty Manual Roller and Blade Stops, please contact a Thomas Conveyor & Equipment Automation Engineer at 844 220 0086 or click on the Contact Us button above.