Parts Conveyor with Feeder, Roach Model PC-F

Small Parts Handing or Feed Conveyors can be modified to optimally convey your small items while maximizing yield and improving the performance of your downstream equipment.

Features

• Available with nitrile belting or wire mesh belting (Wire mesh belts are suited for light transfers and positive drives)
• Includes a horizontal feeder section that can be stationed underneath machinery to accept parts, chips, slugs or scrap
• Transports items into hoppers, storage bins or other containers for storage, disposal or recycling
• Portable
• Comes in a wide variety of widths and lengths
• Nitrile solid woven belting offers superior abrasion and impact resistant properties, minimizing cover wear and improving operational performance

Applications

• Designed for recycling, agricultural and industrial applications
• Conveys oily products, grains, feeds, fertilizers, agriculture and produce
• Drying, cooling, heating, draining coating and glazing

Specifications

• Belting: Black PVC-120 (CXFS) or 1/2” x 1” flat wire mesh belt with 1-1/2” high galvanized cleats on 12” centers.
• Drive Pulley: 4” dia., with 1-3/16” dia. shaft, fully lagged with nitrile belt; 4” dia. sprockets supplied with flat wire mesh belt.
• Tail Pulley: 4” dia. with 1-3/16” dia. shaft.
• Take Up: Screw type unit at tail pulley provides 12” belt take-up.
• Bed: 8” deep x 12 ga. enclosed box type construction with 14 ga. steel belt return pan.
• Bearings: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
• Blet speed: 35 FPM, constant.
• Minimum Parts Size: 1/2” cube for nitrile belt, 1” cube for flat wire mesh belt.
• Incline: 30, 36 and 45° (specify).
• Portable Support: Adjustable floor support with 4” dia. casters and bracing.
• Motor Drive: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
• Capacity: 350 lbs. total distributed load.
• Roller Chain: No. 50 chain provided at drive pulley. Chain take-up provided on motor base.
• Electrical Controls: Optional

Options

• Speed: Constant speed 1.5-60 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available. NOTE: Capacity changes with speed. 100 FPM MAX. with roll-to-roll chain drive.
• Motors: Available through 1 HP in TEFC, explosion proof, dirty duty, brake motor, 115/230/1, 575/3, etc. F
• Floor Supports: Supports and knee braces available.
• Electrical Controls: Magnetic starter (one direction or reversible); one direction manual starter; momentary start/stop push button station; forward/reversing/ stop push button station; mounting and pre-wiring for units 12’-0” long and under; limit switch, photo relay; others available

For more information on the Roach Model PC-F Parts Conveyor with Feeder, please contact a Thomas Conveyor & Equipment Automation Engineer at 844 220 0086 or click on the Contact Us button above.