Parts Conveyor, Roach Model PC

Close Up View of Roach Model PC Parts Handling Conveyor with Cleating
PDF CATALOG

TYPE: Parts Handling Conveyors

MODEL: ROACH Model PC

Roach Model PC Parts Conveyor can be customized with Rubber Belting, Nitrile Belting, Stainless Steel Belting or Wire Mesh Belting for your small parts application.

Small Parts Handing or Feed Conveyors can be modified to optimally convey your small items while maximizing yield and improving the performance of your downstream equipment.

Features

  • Available with stainless steel, nitrile belt or wire mesh belting
  • Includes a horizontal feeder section that can be stationed underneath machinery to accept parts, chips, slugs or scrap
  • Transports items into hoppers, storage bins or other containers for storage, disposal or recycling
  • Portable
  • Comes in a wide variety of widths and lengths to accommodate your specific needs
  • Nitrile solid woven belting offers superior abrasion and impact resistant properties, minimizing cover wear and improving operational performance

Applications

  • Designed for recycling, agricultural and industrial applications
  • Conveying oily products, grains, feeds, fertilizers, agriculture and produce.

Specifications

  • Belting: Black PVC-120 (CXFS) with 1-1/2” high molded cleats on 12” centers; 1/2” x 1” flat wire mesh belt with 1-1/2” high galv. cleats on 12” centers. NOTE: Units with 6” wide belt not available with wire mesh belt.
  • Drive Pulley: 4” dia. with 1-3/16” dia. shaft, crowned and fully lagged. '
  • Tail Pulley: 4” dia., crowned, with 1-3/16” dia. shaft.
  • Belt Return: Formed steel slide retains belt and cleats inside bed.
  • Bearings: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
  • Belt Speed: 60 FPM, constant.
  • Bed: 7” deep x 12 ga. one piece formed box-type construction.
  • Take-Up: Screw type unit at tail pulley provides 12” belt take-up.
  • Portable Support: 4” dia. casters, tubular construction, adjustable both ends.
  • Guard Rails: 3-1/2” high x 12 ga. formed steel with gate at infeed.
  • Motor Drive: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
  • Capacity: 330 lbs. total distributed live load at 60 FPM.
  • Electrical Controls: Optional

Options

  • Drive clearance: Motor drive may be mounted higher above bed or underneath bed for additional clearance.
  • Stainless steel belt option available; ideal for operations needing washdown capabilities
  • Can be customized with Rubber Belting, Nitrile Belting, Stainless Steel Belting or Wire Mesh Belting 
  • Can be outfitted with wire mesh belting, suited for light transfers and positive drives
  • Open fabrication makes wire mesh belts the most efficient metal conveyor belt for drying, cooling, heating, draining, coating and glazing
  • Floor Supports: Permanent, adjustable supports available.
  • Belt Speed: Constant speed 10 to 60 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available. NOTE: Capacity changes with speed.
  • Motors: Available through 1 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.
  • Electrical Controls: Magnetic starter; manual starter; momentary start/stop push button station; mounting and pre-wiring for units 12’-0” long and under; limit switch; photo relay; others available.

For more information on the Roach Model PC Parts Conveyor, please contact a Thomas Conveyor & Equipment Automation Engineer at 844 220 0086 or click on the Contact Us button above.

QUESTIONS? CALL 844-220-0086

Related Products

  • Roach Model PC-F Parts Conveyor With Feeder features a horizontal feeder section which may be stationed underneath machinery to accept parts, chips, slugs or scrap. The Model PC-F then transports such materials into hoppers, storage bins or other containers for storage, disposal or recycling
    Parts Conveyor with Feeder, Roach Model PC-F

    ROACH MODEL PC-F

    view now