Medium Duty Chain Driven Zero Pressure Accumulator, Roach Model SZA192CDA Smart Zone™

Features

• Accumulates medium duty loads in 5' zones
• 300 lbs./ft. up to a maximum of 1200 lb. pallet load
• SMART ZONE technology incorporates photo electric sensors to detect product loads instead of sensor roller eliminating many issues found with sensor rollers
• Products do not touch during accumulation
• Items are singulated individually off of the conveyor
• Easy to install
• Simple to maintain

Applications

• Accumulation conveyors are often used in a conveyor system when:
  • trying to buffer product prior to sortation
  • when merging product together
  • at the end of the line where an operator will unload

Specifications

• Tread Rollers: 1.9” dia. x 12 ga., model 192S.
• Chain Drive: Roller-to-roller No. 40 roller chain. Zone-to-zone No. 60 roller chain.
• Chain Guard: All chains are completely enclosed along the entire length of conveyor
• Center Drive: Drive either side mounted or underside mounted (specify). Drive shafts are supported by precision, heavy duty, lubricated, ball bearing units.
• Roller Centers: 4” or 6” RC ONLY
• Speed: 35 FPM, constant
• Accumulation Zone: 5’-0” zone lengths, zone singulation operation, photo electric sensor controlled zones with air clutch. (60 psi max)
• Bed: 6-1/2” x 1-1/2” x 10 ga. and 4-1/2” x 1-1/2” x 10 ga. formed steel channel frame. Bed sections are bolted together with butt couplings and floor supports.
• Bearings: Removable type, heavy duty ball bearings, zinc-plated, grease packed, labyrinth seal.
• FRL: Unit is provided with filter, regulator and lubricator with 3/8” ports for 60 PSI operational pressure.
• Motor Drive: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
• Capacity: 300 lbs./ft. up to a maximum of 1200 lb. pallet load.

Options

• Zone Lengths: 3’ through 10’ in 4” or 6” increments as per roller centers and zone chain pitch. Frame lengths will vary with zone lengths.
• Bed: 6-1/2” x 1-1/2” x 7 ga. and 4-1/2” x 1-1/2” x 7 ga. formed
  steel channel frame.
• Tread Rollers: 1.9” dia. x 9 ga. steel, model 199S tread rollers.
• Floor Supports: Supports, knee braces, casters and polytier supports available. See Conveyor Accessories.
• Side Mounted Clutch: Consult with Thomas Conveyor Automation Engineer for low elevation model SZ192CDAS with side mounted clutch.
• Speed: Constant speed 20-120 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available. Minimum unit speed is 20 FPM for model CDA. NOTE: Capacity changes with speed.
• Motors: Available through 3 HP in TEFC, explosion proof, dirty duty, brake motor, 115/230/1, 575/3, etc.
• Defused SmartZone: Photo eyes mounted below tread rollers.

For more information on the Medium Duty Chain Driven Zero Pressure Accumulator Roach Model SZA192CDA Smart Zone™  please contact a Thomas Conveyor & Equipment Automation Engineer at 844 220 0086 or click on the Contact Us button above.