Medium Duty Belt Driven Live Roller Curve Spur Conveyor, Roach Model 196LRCS

The Roach Model 196LRCS, Medium Duty Belt Driven Live Roller (BDLR) Curve Spur, can be used in diverging or converging applications or for product diversion to a spur line or for merging loads of totes, fixtures, cartons and cardboard boxes.

Features

• Ideal for transferring products from one conveyor line to another
• Can be used as a transfer from or to a straight line conveyor to divert products in a different direction
• Can be used as a slave drive from a 196VP or 796CALR conveyor
• Ideally used where numerous lines must transfer onto a main conveyor line, from work stations or other similar operations
• Reversible
• Rollers in this conveyor are driven by one another with high tensile O-rings

Applications

• Diverging or converging applications
• Product diversion to a spur line
• Merging loads of totes, fixtures, cartons and cardboard boxes

Industries

• Manufacturing
• Order Fulfillment
• Warehousing & Distribution
• Aerospace
• Government
• Military & Agency
• Automotive
• Parcel Handling

Specifications

• Tread Rollers: 2-1/2” dia. to 1-11/16” dia. x 14 ga. tapered rollers (model 254T); 1.9” dia. x 16 ga. (model 196S) straight tangent rollers.
• Pressure Sheaves: Provides drive belt pressure to upper tread rollers.
• Belt: “B” section V-belt.
• Take Up: Screw type adjustable sheave with flat idler sheaves provided to maintain belt tension.
• Tangents: 12” opposite spur end on 60/30 unit; 18” opposite spur end on 45/45 unit.
• Bed: 7” x 1-1/2” x 12 ga. formed steel channel frame.
• Bearings: End shafts are supported by precision, heavy duty, lubricated, ball bearing units with cast iron housings.
• Motor Drive: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor, located at infeed end of curve below bed.
• Spur Hand/Drive Location: Drive located on outside of curve. Specify hand of spur as “left hand” or “right hand” and location of drive specified as “left hand drive” or “right hand drive”. NOTE: Drive location determined with reference point located at outside of curve. For models slave driven (less drive), specify drive shaft location.
• Belt Speed: 60 FPM, constant.
• Roller Chain: Drive shaft is driven by No. 50 chain.
• Capacity: 500 lb. total distributed live load.
• Electrical Controls: Optional

Options

• Side Mounted End Drive: Provides minimum overall conveyor height of 10”.
• Drive: Located on inside radius of curve.
• Motors: Available through 3 HP in TEFC, explosion proof, dirty duty, brake motor, 115/230/1, 575/3, etc.
• Speed: Constant speed 10-120 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available.
• Ceiling Hangers: 5/8” dia. threaded rod with hardware to attach rods to conveyor. Provides 6’ clearance between ceiling and TOR (furnished in place of floor supports). See Conveyor Accessories.
• Guard Rails: 1-3/4” x 1” formed channel (model GC), adjusts horizontally to 8” wider than roller and vertically to 6” above roller; formed steel fixed (model FSG in 2”, 4”, 6”, 8”, 12” and 18” heights; 1-1/2” angle (model GA1-1/2). See Conveyor Accessories.
• Electrical Controls: Magnetic starter (one direction or reversible); One direction manual starter; Momentary start/stop push button station; Forward/ reversing /stop push button station.
• Floor Supports: See Conveyor Accessories for various elevation and types.

For more information on the Roach Model 196LRCS please contact a Thomas Conveyor & Equipment Automation Engineer at 844 220 0086 or click on the Contact Us button above.