Medium Duty Belt Driven Live Roller Curve Conveyor, Roach Model 196LRC

Features

• Tapered rollers to maintain a consistent product orientation in your application
• Reversible
• Provides superior package conveyance; the tapered roller presents a true conveying surface on a curve, giving the correct radial speed along the full length of each roller, thus maintaining product orientation. 

Applications

• Typically used in shipping/receiving applications
• Packaging handling
• Manufacturing
• Distribution
• Designed to transport medium to heavy cartons
• Often used as a slave driven unit to a Medium Duty CAM Adjusted Live Roller Conveyor (796CALR).
  When the gear motor drives the first conveyor, the slave drive option then turns the spindle of the second, moving it at the same speed as the first. This option often saves money because fewer gear motors are required for system operation. 

Specifications

• Tread Rollers: 2-1/2” dia. to 1-11/16” dia. x 14 ga. steel tapered rollers, model 254T; 1.9” dia. x 16 ga. steel straight tangent rollers, model 196S.
• Pressure Sheaves: Provides drive belt pressure to upper tread rollers.
• Belt: “B” section V-belt.
• Take Up: Screw type adjustable sheaves provided to maintain belt tension.
• Tangents: 1’-0” both ends on 90°; 1’-6” both ends on 45°; 1’-0” both ends on 180°. Tangent roller centers provided on 3” RC.
• Speed: 60 FPM, constant.
• Bed: 7” x 1-1/2” x 12 ga. formed steel channel frame.
• Bearings: End shafts are supported by precision, heavy duty, lubricated, ball bearing units with cast iron housings.
• Roller Chain: Drive shaft is driven by No. 50 chain.
• Drive Location: Drive located on outside of curve. Specify left hand tangent length, right hand tangent length and drive location (“left hand drive” or “right hand drive”).
  NOTE: Drive hand determined with reference point located at outside of curve. For models slave driven (less drive), specify drive shaft location.
• Capacity: 500 lb. total distributed live load.
• Motor Drive: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor, located at infeed end of curve below bed on 45° and 90° curves; 3/4 HP supplied on all 180° curves.
• Special Widths: Consult factory for pricing of ALL widths not shown.
• Electrical Controls: Optional.

Options

• Side Mounted End Drive: Provides minimum overall conveyor height of 10”.
• Drive: Located on inside radius of curve.
• Speed: Constant speed 10-120 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available.
• Floor Supports: See Conveyor Accessories for various elevation and types.
• Ceiling Hangers: 5/8” dia. threaded rod with hardware to attach rods to conveyor. Provides 6’ clearance between ceiling and TOR (furnished in place of floor supports). See Conveyor Accessories.
• Tangent Lengths: 1’-6”, 2’-0”, 2’-6”, 3’-0”, 3’-6”, 4’-0”, 4’-6” and 5’-0” tangent lengths available on 45° and 90°. Total combined length of tangents not to exceed 6’-0”.
• Guard Rails: 1-3/4” x 1” formed channel (model GC), adjusts horizontally to 8” wider than roller and vertically to 6” above roller; formed steel fixed (model FSG in 2”, 4”, 6”, 8”, 12” and 18” heights; 1-1/2” angle (model GA1-1/2). See Conveyor Accessories.
• Motors: Available through 3 HP in TEFC, explosion proof, dirty duty, brake motor, 115/230/1, 575/3, etc.
• Electrical Controls: Magnetic starter (one direction or reversible); One direction manual starter; Momentary start/ stop push button station; Forward/reversing/ stop push button station.

For more information on the Model 196LRC, Medium Duty Belt Driven Live Roller Curve,  please contact a Thomas Conveyor & Equipment Automation Engineer at 844 220 0086 or click on the Contact Us button above.