Medium Duty Roll to Roll Chain Driven Live Roller Conveyor, Roach Model 192CDLR

The Medium Duty Chain Driven Live Roller Roach Model 192CDLR transports medium duty unit loads which do not require product orientation.

Features

• Designed to transport medium duty loads such as castings, containers, loaded pallets, totes, or drums
• Rollers may be mild steel, galvanized or stainless steel for special applications
• Where impact loads are possible, thicker gauge roller material and upgraded bearings will be specified
• Reversible drive which can be mounted on the side or underside 

Applications

• Manufacturing
• Food & beverage
• Pharmaceutical
• Construction
• Distribution industries
• Assembly lines

Specifications

• Tread Rollers: 1.9” dia. x 12 ga. steel, model 192S with sprockets.*
• Chain Drive: Roller to roller with No. 40 circular roller chain.
• End Drive: Reversible drive either side mounted or underside (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.
• Chain Guard: Chain drive is enclosed, top and bottom, along entire length of conveyor.
• Bed: 5-1/2” x 1-1/2” x 10 ga. and 3-1/2” x 1-1/2” x 10 ga. formed steel channel frame.
• Bearings: Removable type, heavy duty bearings, zinc plated, grease packed, labyrinth sealed.
• Motor Drive: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
• Speed: 45 FPM, constant.
• Drive Location: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve).
• Roller Centers: 5” RC measured at outside radius of curve.
• Electrical Controls: Optional

Options

• Speed: Constant speed 1.5-60 FPM; DC variable speed; AC inverter variable speed. Other con-stant or variable speeds available. NOTE: Capacity changes with speed. 100 FPM Max with Roller to Roller Chain Drive.
• Motors: Available through 3 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.
• Floor Supports: Supports, knee braces, casters, ceiling hangers and polytier supports available.
• Electrical Controls: Magnetic or manual starter; limit switch; others available.

For more information on the Model 192CDLR please contact a Thomas Conveyor & Equipment Automation Engineer at 844 220 0086 or click on the Contact Us button above.