Line Shaft Cross-Over Module Conveyor, Roach Model 796LSX

Line Shaft Cross-Over Module Roach Model 796LSX can efficiently take product from one conveyor and deposit it onto another conveyor

TYPE: Line Shaft Conveyors


The Model 796LSX Line Shaft Cross-Over Module is designed to efficiently move product from one conveyor and deposit it onto another conveyor.

The Model 796LSX was designed to offer a standard component to eliminate confusion over cross-overs. Line shaft cross overs can handle very small or large products, even those with unstable bases.


24 Hour Shipping Available


  • Available in 2'0 to 10' lengths
  • The ONLY component required to cross over drive shafts
  • Cross over conveyors can drop product onto infeed conveyors, labeling machines, carton erecting machines or check weighing and metal detectors
  • They are the perfect solution in making a ‘dead’ area a productive use of space
  • Speed: 60 FPM
  • Handles products of nearly any size
  • Can handle unstable based items


  • Transportation
  • Minimum pressure accumulation
  • Zero pressure accumulation
  • Sortation
  • Distribution
  • Warehousing
  • Food Processing
  • Parcel Handling


  • Tread Rollers: 1.9” dia. x 16 ga. steel, model 196S grooved.
  • Drive Belt: 3/16” dia., polyurethane belts. Nominal 15 lbs. per roller drive.
  • Drive Shaft: 1” dia. C1018 cold rolled steel shaft.
  • Couplings: Couplings located both ends or one end only. Specify where couplings required.
  • Bearings: Precision, lubricated, ball bearing units with composite housings.
  • Speed: 60 FPM constant.
  • Bed: 7” x 1-1/2” x 12 ga. formed steel channel frame.
  • Motor Drive: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
  • Cross Over Direction: Specify “cross over to right hand” or “cross over to left hand”.
  • Electrical Controls: Optional.


  • Guard Rails: 1-3/4” x 1” formed channel (model GC), adjusts horizontally to 8” wider than roller and vertically to 6” above roller; formed steel fixed (model FSG in 2”, 4” & 6” heights; fixed channel (model FC); 1-1/2” angle (model GA1-1/2). See Conveyor Accessories.
  • Floor Supports: Supports, knee braces, casters, ceiling hangers and polytier supports available. See Conveyor Accessories.
  • Conveyor Speed: Constant speed 15-120 FPM; DC variable speed; AC inverter variable speed. MINIMUM operating speed for line shaft conveyor is 30 FPM.
  • Electrical Controls: Magnetic starter (one direction or reversible); Others available. Consult factory

For more information on the Roach Model 796LSX please contact a Thomas Conveyor & Equipment automation engineer at 844 220 0086 or click on the Contact Us button above.

QUESTIONS? CALL 844-220-0086