Wexxar BEL 180 Semi-Automatic Random Case Taper

---

Features

• The BEL 180 can be set to random or semi-automatic depending on the changing demands of your packaging line.
• One Button Setup: With the press of a button, the BEL 180 is ready to go from uniform to random case sealing
• Uniform case sealing; Adjusts for random case sizes during operation and can adjust to particular case size and lock in position to quickly seal a run of uniform size cases
• Cases are taped top and bottom with either 2" or 3" wide tape using DEKKA stainless steel tape heads
• Reliable, consistent “no break” tape advance
• Easy tape roll changes; The tape head tilts outwards for quick changes. The tilt-out feature is exclusive to DEKKA tape heads.
• Advanced safety features prevent accidental restarts and guards between the operator and moving parts
• Type 304 Stainless-steel machine frame, electrical enclosure, arch, and case transport rollers
• Dual HP side belt drive gear motors
• Conveyor belt and assembly parts are mounted on top and easily accessible, making changes and adjustments simple
• Can seal a wide range of case sizes at speeds of up to 20 cases per minute
• Power Save Mode
• Designed and built in North America with premium materials

Safety Provisions

• Top drive lifts if hands contact front sensor plate
• Height and width adjusting cylinders have air pressure sensing and spring activated rod locks
• Magnetic motor starter switch to prevent accidental restarts after a power interruption
• Potential hazards are warned with labels to ANSI Z535 standards
• Front and rear guard doors

Applications

• Automotive / Hardware
• Bakery
• Beverage
• Confectionery/Snacks
• Dairy
• Furniture / Household Goods / Electronics
• Meat / Seafood
• Retail Ready
• Personal Care / Cosmetics
• Pharmaceutical / Medical
• Produce / Agriculture
• Textiles/Apparel

Specifications

• Speed: up to 30 cases in uniform mode, 20 cases per minute in random mode (CPM)
• Corrosion resistant and paint free frame construction
• Machine Weight: 500 lbs
• Machine Dimensions: 46”(L) x 36”(W) x 54”(H)
• Electrical: 120 Volts, 1 PH, 60 Hz - 5 amp draw
• Case Size Minimum : 6" x 6" x 6"
• Case Size Maximum : 72" 17" x 19"
• Infeed/Outfeed Height Minimum : 23.5"
• Infeed/Outfeed Height Maximum : 30"

Options

• 3” DEKKA Stainless Steel Tape head upgrade
• Locking casters
• Accumulation Table
• Water Resistant, Washdown Stainless Steel Construction Upgrade(180SS) 
• Printwiz Tape Printer

For more information on the Wexxar BEL 180 Semi-Automatic Tape Case Sealer, contact a Thomas Conveyor & Equipment automation engineer or give us a call at  844 220 0086 to speak with us directly.