Line Shaft Driven Conveyor Curve Module , Roach Model 796LSC

Line shaft driven conveyors are named from the drive system which consists of a shaft running the full length of the conveyor. The rollers are driven by a large O-ring that sits in a groove on the roller and travels around a plastic spool mounted on the shaft.

Features

• Tapered rollers help maintain product orientation
• Designed to be driven from a Model 796LS, thus reducing the overall number of drives required
• Optimum solution for conveyance of light (up to 15lbs/roller) loads
• Speeds of 25-120 FPM
• Designed for flat-bottomed, evenly distributed loads, such as those found in distribution and warehousing, parcel handling, and food packaging industries
• With the exception of soft bottomed containers like cement bags, these conveyors can be utilized for almost all applications
• Clean, dry, oil free environments are the ideal conditions to maximize line performance

Applications

• Transportation
• Minimum pressure accumulation
• Zero pressure accumulation
• Sortation
• Conveyance of light totes, containers, cartons & box loads (up to 15lbs/roller)

Specifications

• Tread Rollers: 2-1/2” dia. to 1-11/16” dia. x 14 ga. steel tapered rollers, model 254T
• Drive Belt: 3/16” dia., polyurethane belts. Nominal 15 lbs. per roller drive.
• Drive Shaft: 1” dia. C1018 cold rolled steel shaft, located on inside radius. NOTE: Spools are keyed to provide positive drive (designed not to slip on drive shaft)
• Couplings: Couplings located both ends (type “A”) or one end only (type “B” or “C”). See ‘line shaft curve couplings’ above and specify.
• Tangents: 1’-0” both ends on 60° and 90°; 1’-6” both ends on 30° and 45°. 1’-0” infeed, 1’-0” discharge and no center tangent on 180°. Tangent roller centers 3” RC.
• Bearings: Precision, lubricated, ball bearing units with steel housings. 6 per 90° and 60° curve; 4 per 45° and 30°.
• Universal Joints: 4 per 90° and 60° curve; 2 per 45° and 30° curve.
• Bed: 7” x 1-1/2” x 12 ga. formed steel channel frame
• Motor Drive: Driven by 796LS.

Options

• Floor supports
• Guard Rails

For more information on the Roach Model 738LSC please contact a Thomas Conveyor & Equipment Automation Engineer at 844 220 0086 or click on the Contact Us button above.