Line Shaft Converging Spur Module Conveyor, Roach Model 796LSS

Merge conveyors combine multiple lanes of product into a single lane. These conveyors can handle small packaged product up to large boxes.  The merging conveyor can easily replace a person assigned to align multiple rows of products into a single lane. 

Features

• Live roller spur conveyors are used in diverging and converging applications
• Can be self powered or slave driven
• Spur modules are designed to be driven by a Model 796LS, decreasing overall number of drives in a conveyor system
• Live roller spurs are used to transfer cartons, cases, boxes, totes, etc. onto and off of the main conveyor line. 

Applications

• Merging conveyors are vital for downline processes that require product to be in a singe-file line such as scanners, labelers, classifiers, graders, diverts and more. 

Specifications

• Tread Rollers: 1.9” dia. x 16 ga. steel, model 196S grooved, 3” centers.
• Drive Belt: 3/16” dia., polyurethane belts. Nominal 15 lbs. per roller drive.
• Drive Shaft: 1” dia. C1018 cold rolled steel shaft.
  NOTE: Spools in spur section only are keyed to provide positive drive (designed not to slip on drive shaft).
• Couplings: Couplings located both ends or one end only. Specify where couplings required.
• Bed: 7” x 1-1/2” x 12 ga. formed steel channel frame. Short side of spur is always 12” overall length.
• Bearings: Precision, lubricated, ball bearing units with composite housings.
• Motor Drive: Unit is designed to be driven by 796LS.
• Roller Chain: Spur driven via crossover with No. 40 chain.

Options

• Floor Supports: Supports, knee braces, casters, polymer supports & ceiling hangers available. See Conveyor Accessories.
• Guard Rails: 1-3/4” x 1” formed channel (model GC), adjusts horizontally to 8” wider than roller and vertically to 6” above roller; formed steel fixed (model FSG in 2”, 4” and 6” heights; fixed channel (model FC); 1-1/2” angle (model GA1-1/2). See Conveyor Accessories

For more information on the Roach Model 796LSS please contact a Thomas Conveyor & Equipment automation engineer at 844 220 0086 or click on the Contact Us button above.